Details
Item specifics
- Dimensions: 160x160 mm / 6.3x6.3 inches;
- Hardness: 120-160 N;
- Length: 500, 1000, 2000 mm / 19.7, 39.4, 78.74 inches;
- Tensile strength: 90 kPa min.
- Colour: Charcoal;
- Elongation at break: 120% min.
- Density: 30kg/m3;
- Weight: 0.12 - 0.24 - 0.48 kg
Product Description
Bass Trap «Klin Mini» - a high-performance low-frequency absorber, which is mounted in the corners of the intersection of two walls vertically, or at the intersection of the walls and ceiling horizontally to achieve the right sound in the room.
Bass Traps works by trapping the random ‘omni-directional’ bass energy that tends to cluster in corners and overwhelm the room. They have the positive effect of reducing smear and giving bass more definition and punch allowing you to control low frequency energy. and helping your studio to attain a tighter, more controlled bass.
Most acoustic engineers for acoustic control of sound always attach importance to such places of the room as the angles of intersection of walls. This is primarily based on the fact how the sound is distributed within the room in which the walls and ceilings act as sound guides directing sound to the corners where it accumulates in the low-frequency hum causing resonances.
Traps set in the corners of the room significantly reduce the time of natural reverberation, which is especially noticeable by how low frequencies lose their dirty and unnecessary "tail". Even if there are no other sound-absorbing surfaces in the room, only the bass traps significantly improve the sound characteristics of the room in the lower part of the frequency spectrum.
Applications:
- Recording Studios;
- Home Theaters;
- Music Rooms;
- Office Environments;
- Rehearsal Rooms;
- Auditoriums;
- Conference Rooms;
- etc.
Intended use:
- Absorbs Low, High and
Mid-Range frequencies; - Slap echo;
- other intrusive noises.
Mounting options
Please note
- Wall mounting hardware (FoamFix) not included.
- Acoustic polyurethane foam has so-called pores. These pores are formed by foaming the material to the desired density and they can be of different sizes. This is a normal phenomenon in acoustic foam. The number of pores can be up to 1% of the total surface area.
- The color of the product in the photo may differ from the color of the actual product. This is due to color distortion by your monitor, camera settings, and other factors.
Help spread the truthing informations to other potential customers by leaving your opinion about the quality of our services and products.
View more about UA Acoustic Klin Mini Corner BassTrap 200cm on main site