Raidho X1T Bookshelf Speaker Made In Denmark

Raidho X1T Bookshelf Speaker Made In Denmark


Specifications
X1T
Technical Information Topology 2 way Bass Loading Vented design. Port in front panel - Conform Drivers 1 x Raidho Ribbon Tweeter 1 x 5,25” Raidho Ceramix driver Crossover Point 3,5 KHz Frequency Range 70Hz50KHz+/-3dB Sensitivity 85 dB 2,83 V/m Nominal Impedance >6 ohm Power Requirement >50 W (Though we have seen excellent results with small tube amplifiers) Finish Black piano and White piano Dimensions WxHxD, mm 143x315x230 Weight, kg 8
X1T
X1T SPEAKER STAND, X1T SPEAKER
Details

Raidho X1t

The new X1t is based on the classic super mini monitor, the X1. This revised version seeks to pack as much performance as possible into a very small form factor. And finally, at a relatively low price, in comparison to performance. Welcome to the new reference in super mini monitors.

 

In comparison to the standard X1, better components have been implemented resulting in more open and clear sound. The enclosure has further been redesigned internally meaning the airflow and bass reflex port provides much higher bass output and quality.

 

The t in X1t means Tantalum. Tantalum belongs to a class of metals known as refractory metals, which are defined by their strong resistance to heat and wear. It has a melting point of 2,996 °C, the fourth highest of all metals. This makes the membrane much stiffer and harder without adding any weight and thereby raising the breakup modes to an incredible 15kHz.

 

We can make this speaker sound amazing in 80 m2 rooms, but in order to get proper bass, we recommend no larger than 25 m2.

 

Optional stand: Single Stand white and black.

 

The X1 is still available.

 

Raidho Series X
Drive Unit

This drive unit is not only highly advanced and built in-house in Denmark, but is also a piece of art.

The result is that the speakers disappear even more from the equation, drawing a soundscape without audible distortion and with a pitch-black background that made the instruments stand out and create holographic sound stage.

 
 
 

The Legendary Raidho Ribbon Tweeter

Our proprietary, trademark ribbon tweeter is a unique design. It is completely designed and build by hand in-house in Denmark. To be exact, it is a Planar Magnetic Tweeter due to the tracks in the foil. The foil is 11 micron thick, which means it is 50 times less mass in comparison to a conventional dome tweeter. This is because there is no voice coil and the extreme low weight of the foil (20 milligram). The result is virtually no resonances or distortion, and the breakup point is at an incredible 82 KHz! What you hear is amazing clear and natural sound. All the detail in the world, but no fatigue, no distortion, and no coloration!

 
 

View more about Raidho X1T Bookshelf Speaker Made In Denmark on main site